{"id":4985,"date":"2018-02-14T15:47:12","date_gmt":"2018-02-14T20:47:12","guid":{"rendered":"https:\/\/tunstall-inc.com\/?page_id=4985"},"modified":"2023-03-29T09:08:31","modified_gmt":"2023-03-29T13:08:31","slug":"evo-tpc-direct-mount-operator-wtamper-protection-cover","status":"publish","type":"page","link":"https:\/\/tunstall-inc.com\/macon-controls\/non-electric-operators\/evo-tpc-direct-mount-operator-wtamper-protection-cover\/","title":{"rendered":"EVO-TPC Direct Mount Operator w\/Tamper Protection Cover"},"content":{"rendered":"

\"\"<\/p>\n

 <\/p>\n

 
\n <\/p>\n

Overview<\/h3>
\n

\"EVO-TPC<\/p>\n

The Macon EVO-TPC thermostatic operator will help you balance your heating system. The EVO-TPC operator has one of the most accurate sensors available for radiator temperature control. The problems of overheating, under-heating and wide temperature swings can now be minimized.<\/p>\n

The EVO-TPC thermostatic operator by Macon Controls conserves energy by regulating temperature. Fuel costs can be reduced up to 30%!<\/p>\n

\"\"The EVO-TPC is a self-acting, adjustable, non-electric
\nthermostatic operator. It has adjustable max.\/min. temperature, selected temperature locking feature and can be shutoff completely if required.
\nThe symbol * protects against frost damage. Each EVO-TPC thermostatic operator is individually calibrated and conforms to ASHRAE standardization rules for temperature regulation. The EVO\u2019s smooth shape and narrow air gaps gives a nice operation and makes it easy to keep clean. They can be mounted on all Macon NT series valves. Millions are in use throughout the world.<\/p>\n

 <\/p>\n<\/div>\n

 <\/p>\n

Specifications<\/h3>
\n\n\n\n
DATA:<\/span><\/strong>
\nOPERATOR:
\nTemp. Range: 50\u00b0 – 82\u00b0F
\nHystersis: 0.9\u00b0F
\nHeat Transfer: 1.1\u00b0F (Valve Housing Sensor)
\nDead Time: 0.8 Minutes
\nMax. Differential Pressure: 20 psi
\nSuggested Differential Pressure = 0.5 to 2.9 psi
\nMax. Water Temp.: 250\u00b0F
\nMax. Storage & Ambient Temp.: 122\u00b0F
\nMax. Steam Pressure: 15 psig
\nMax. Movement: 0.125 inches
\nNominal Opening: 0.018 (3.6\u00b0F)
\nLong Term Test: 5000 cycles (1.3\u00b0F)
\nTotal Weight: 6.73 oz.
\nWidth (A) = 1.73″
\nHeight (B) = 3.66″<\/td>\n		\"\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
DIAL SETTINGS:<\/span><\/strong>
\n0 = Off
\n* = 50\u00b0F (Frost Protection)
\n1 = 54\u00b0F
\n3 = 61\u00b0F
\n5 = 68\u00b0F
\n6 = 72\u00b0F
\n7 = 75\u00b0F
\n8 = 79\u00b0F
\n9 = 82\u00b0F<\/td>\n		\"\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Min\/Max Settings<\/h3>
\n

Each unit is factory preset per the dial settings listed. If field adjustments are necessary see below.<\/span><\/p>\n

Maximum setting
\n1. Turn the wheel to maximum.
\n2. Push the mark in with limit tool (located opposite the dial setting window) and press in the wheel handle 1-2 mm until it stops.
\n3. Remove the limit tool and press in the wheel handle until it stops.
\n4. Set the required temperature according to the chart above.
\n5. Pull the wheel handle out and the maximum temperature is set.<\/p>\n

Minimum setting
\n1. Turn the wheel to minimum
\n2. Push the mark in with limit tool (located opposite the dial setting window) and press in the wheel handle 1-2 mm until it stops.
\n3. Remove the limit tool and press in the wheel handle until it stops.
\n4. Set the required temperature according to the chart above.
\n5. Pull the wheel handle out and the minimum temperature is set.<\/p>\n<\/div>\n

Click Here for Cross Reference chart of Previous Generations of Non-Electric Operators
\n<\/a><\/p>\n

BULLETIN: EVO-TPC-1802 – Direct Mount Operator w\/Tamper Protection Cover – EVO-TPC<\/a><\/strong><\/p>\n","protected":false},"excerpt":{"rendered":"

        Click Here for Cross Reference chart of Previous Generations of Non-Electric Operators BULLETIN: EVO-TPC-1802 – Direct Mount Operator w\/Tamper Protection Cover – EVO-TPC<\/p>\n","protected":false},"author":6,"featured_media":0,"parent":144,"menu_order":3,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":"","_links_to":"","_links_to_target":""},"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/tunstall-inc.com\/wp-json\/wp\/v2\/pages\/4985"}],"collection":[{"href":"https:\/\/tunstall-inc.com\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/tunstall-inc.com\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/tunstall-inc.com\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/tunstall-inc.com\/wp-json\/wp\/v2\/comments?post=4985"}],"version-history":[{"count":1,"href":"https:\/\/tunstall-inc.com\/wp-json\/wp\/v2\/pages\/4985\/revisions"}],"predecessor-version":[{"id":86116,"href":"https:\/\/tunstall-inc.com\/wp-json\/wp\/v2\/pages\/4985\/revisions\/86116"}],"up":[{"embeddable":true,"href":"https:\/\/tunstall-inc.com\/wp-json\/wp\/v2\/pages\/144"}],"wp:attachment":[{"href":"https:\/\/tunstall-inc.com\/wp-json\/wp\/v2\/media?parent=4985"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}