EVOLZ Wall Mounted Dial Operator w/Remote Sensor
Overview

Features
- Combined remote dial/sensor
- Small dimensions
- Brass sensor, High sensitivity
- Manufactured to exacting standards using exceptionally high quality materials
- Fiberglass valve plug shaft
- Each sensor is tested and re-checked to achieve exact settings before leaving the factory
- Stainless steel capillary tube, 6’6″ x 6’6″ std. length
- Note that all changing of the actuator can be accomplished without draining the system
- Longer capillary available, consult factory
- All Macon thermostats can be locked at or limited to a specific temperature or temperature range
- Fits all Macon NT series valves
- Simple one-trade installation
- Replaces the valve-mounted sensors on built-in convectors, etc., and where the valve-mounted sensor is exposed to draft from windows or doors
- Sensor guard furnished at no extra charge
- Fully automatic – nonelectric, no wiring
- All Macon valves and thermostats conform to ASHRAE Standard 102P-1983 and European Standard EN 215/1215. We are also ISO 9001 certified (1994) and ISO 14001 certified (1998)
Specifications
DATA: Temp. Range: 50º – 80ºF Hystersis: 0.9ºF Heat Transfer: 1.1ºF (Valve Housing Sensor) Dead Time: 0.8 Minutes Max. Differential Pressure: 20 psi Sugg. Differential Pressure = 0.5 to 2.9 psi Max. Water Temp.: 250ºF Max. Storage & Ambient Temp.: 122ºF Max. Steam Pressure: 15 psig Max. Movement: 0.125 Nominal Opening: 0.018 (3.6ºF) Long Term Test: 5000 cycles (1.3ºF) |
DIAL SETTINGS: 0 = Off * = 50ºF (Frost Protection) 1 = 54ºF 3 = 61ºF 5 = 68ºF 6 = 72ºF 7 = 76ºF 8 = 80ºF |
![]() |
Click Here for Cross Reference chart of Previous Generations of Non-Electric Operators
BULLETIN: EVOLZ – Remote Sensor Thermostat